Presently, we now have mainstream hard drives with storage capacities of 4TB and more, SSD often appears in downright diminutive in comparison. But the main strength of the solid-state drive doesn’t lie in its ability to store loads of data, but instead, on the sheer speed it takes to write and read information. It is important to always remember this fact when purchasing the best SSD for PS4 and it is wise to copy the method of other people – that is, get a smaller SSD to function as the system drive as well as an HDD to function as the storage system. This approach is known to be cost-effective and extremely efficient.
In this article, we have listed some important considerations when shopping for the best SSD for PS4
Although some SSDs have a storage capacity of 120 GB, we do not advise opting for a device with low storage capacity, especially if you play games a lot. For the most part, get something in the range of 250 GB to 500 GB drives, and your decision should solely depend on your needs and most importantly, your budget.
If only a few games are installed at a specific time, I recommend the 250 GB because it is cheaper and better. On the other hand, if you crave for huge AAA games that occupy loads of space, 500 GB is the ideal option. Any device with a storage capacity of 1 TB and above is extremely expensive and excessive.
As you might have known, all SSDs are incredibly faster than hard-disk drives. Yet still, write/read speeds have a slight difference when it comes to the SSD models.
But ultimately, we believe that you shouldn’t be disturbed about these numbers. After all, if you want to replace the HDD with the SSD, it will appear incredibly faster. Asides that, unless you are an experienced user, it is quite difficult to notice the difference between a 500 MB/s and 350 MB/s write speed.
Meanwhile, the more expensive Samsung 960 PRO and other similar varieties may seem very fascinating with their 4-digit data transfer speeds, but again, gamers can overlook this feature. They are much more beneficial for servers and workstations that need to write and read huge volumes of data on a regular basis.
SATA vs. M.2
At present, internal SSDs are attached to your motherboard through one of the two highlighted ways: M.2. or Serial ATA III. But, which is better?
The true fact is that M.2 has a much higher hypothetical throughput, but SATA will be adequate for a non-pro grade SSDs. Another important factor is the aesthetic appeal and form factor of the SSD itself.
SATA SSDs are much similar to the regular 2.5-inch hard drives, while the M.2 SSDs have a smaller size, as such, can fit inside notebooks, laptops, compact PC cases more easily.
But in the end, since speed is not an important feature, we advise that you opt for a device you are more comfortable with and whichever is compatible with your computer, as there is little or no difference between the two unless you intend to get a high-performance SSD as highlighted above. We advise that you peruse this article carefully and enforce the guidelines highlighted in it.